БЕСПЛАТНЫЕ ОБЪЯВЛЕНИЯ
Липецк
Валюта:
Вход

Лабораторное оборудование в Липецке

Фильтры Цена:    new Состояние: new new Подписатьсяnew  ?
Сортировка:

В связи с закрытием производства продаётся твердомер бывший в употреблении.

Владимир
70 000 ₽ Липецк, Кувшинова

Продам складские остатки – толщиномер ГСПМТ-41НЦ-2М по 6000руб в количестве 2шт. Дополнительная информация по запросу.

Юрий Васильевич    
6 000 ₽ Липецк

Продам складские остатки - Меры твердости МТБ-1, МТБ-3, МТВ-1, МТСР-3 по 1000руб в количестве 20шт. Дополнительная информация по запросу

Юрий Васильевич    
1 000 ₽ Липецк

Изготовление образцов формовочных и стержневых смесей, испытываемых на изгиб. Одноместный

ООО "Литмашприбор"    
1 000 ₽  Усмань, Исполатова, ..

Изготовление образцов формовочных и стержневых смесей, испытываемых на растяжение. Многоместный

ООО "Литмашприбор"    
1 000 ₽  Усмань, Исполатова, ..

Аппарат для определения газотворности 44133, предназначен для проведения ряда исследований формовочных смесей и песков: Газотворность - измерение давления газов выделяющихся при нагревании Прокаливаемость...

ООО "Литмашприбор"    
1 000 ₽  Усмань, Исполатова, ..

Твердомер для сухих форм цифровой 04421М предназначен для измерения поверхностной твердости сухих (отверждённых) форм и стержней на формовочных и стержневых участках литейных цехов, в цеховых и заводских...

ООО "Литмашприбор"    
1 000 ₽  Усмань, Исполатова, ..

Твердомер для сырых форм цифровой 04412АМ предназначен для измерения поверхностной твердости сырых форм и стержней на формовочных и стержневых участках литейных цехов, в цеховых и заводских лабораториях...

ООО "Литмашприбор"    
1 000 ₽  Усмань

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture of sandy-clay semi-molds with a flask size of 500x400 mm in foundries...

ООО
100 ₽ Усмань, Исполатова, ..

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of upper mold halves, and when using tilters - and lower mold halves...

ООО
100 ₽ Усмань, Исполатова, ..

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of upper mold halves, and when using tilters - and lower mold halves...

ООО Литмашприбор    
100 ₽ Усмань, Исполатова, ..

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of upper mold halves, and when using tilters - and lower mold halves...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

Inhabited shot blasting chamber KDO-15 is a highly efficient device designed for processing shot supplied under high pressure and high speed to the surface of castings, forgings, rolled products, welded...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

device is designed for shot cleaning of castings, rolled forgings, seams of welded joints, parts after heat treatment, glass, stone and other materials. The assortment range of foundry equipment produced...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used for cleaning forgings, stampings and other workpieces. Tumbling...

ООО "Литмашприбор"    
100 ₽ Усмань

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used for cleaning forgings, stampings and other workpieces. Tumbling...

ООО
100 ₽ Усмань, Исполатова, ..

B-1110 B-1110 Casting Cup Roller Batch Mixer The mixer is designed for the preparation of molding sand according to the ASG process. The principle of operation of the mixer is based on the movement of...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

High-speed single-arm continuous mixer with a capacity of 0.5 to 2 tons of molding sand per hour. This mixer can be used both for the molding of half-molds and for the manufacture of cores by the cold-transferring...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding of half-molds and for the manufacture of cores by the cold-transferring...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

High-speed single-arm continuous mixer with a capacity of 3 to 10 tons of molding sand per hour. This mixer can be used both for the molding of half-molds and for the manufacture of cores by the cold-transferring...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long. The second sleeve allows you to significantly expand the service area and feed the mixture to the required place, which makes...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the ALPHASET, PEP SET, CO2, COLD-BOX Resol + CO2, and FURAN process. Complex...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the ALPHASET, PEP SET, CO2, COLD-BOX Resol + CO2, and FURAN process. Complex...

ООО "Литмашприбор"    
100 ₽ Усмань

• The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. • • The company "Litmashpribor" has the ability to produce for your enterprise...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The company "Litmashpribor" has the ability to produce for your enterprise...

ООО "Литмашприбор"    
100 ₽ Усмань

• The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. • The company "Litmashpribor" has the ability to produce for your enterprise...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

• The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-scale production • The company "Litmashpribor" has the ability...

ООО
100 ₽ Усмань, Исполатова, ..

The complex is designed for big bags, storage, replenishment of supply bins above mixers, including with the ability to work as part of the FK5 molding complex in automatic mode. The company "Litmashpribor"...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work performed in an automatic mode. The company LLC "Litmashpribor"...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can be used in foundries of individual, small-scale and serial production. The...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

• The heat-resistant elevator is designed for vertical transportation of bulk materials as part of industrial production lines. • The peculiarity of this type of elevator is: • • Lack of linen • • The...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can be used in foundries of individual, small-scale and serial production. The...

ООО "Литмашприбор"    
100 ₽ Усмань, Исполатова, ..